Tips for selecting stainless steel plates

When choosing stainless steel plates, we need to consider the operating conditions, such as manual or automatic operation, the performance and type of the hot press, and the quality requirements for the pressed materials, such as hardness and gloss. We also need to consider economic calculations. Each newly polished steel plate is required to produce a certain number of decorative plates of the same quality.
In addition, when choosing the most reasonable thickness of the steel plate, we should consider its service life, quality, and rigidity, as well as the strength requirements of the plate under pressure; thermal conductivity; pressure distribution, and the width and specifications of the press plate.
If the thickness of the steel plate is not enough, it is easy to bend, which will inevitably affect the production of decorative plates. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring unnecessary difficulties in operation. At the same time, we should also consider the margin that should be left when processing or using the stainless steel plate. The thickness of the copper plate is not absolutely consistent, but we strive to make the thickness of the same steel plate as consistent as possible. Generally, the thickness tolerance of the medium-sized saw plate is 0.05-0.15 mm. If the requirements are too strict, the grinding cost will also increase accordingly. Are typically large resistance to tension, stiffness big structural steel plate, the greater the mechanical damage resistance.